Microgreen tray, it is 570mm long, 175mm wide and 28mm deep. Made from high quality UV stable PP 5, made in Italy. We do not currently have a stand made specifically for this length of tray. You can use this as is i.e. just to sit pot plants in. You can add capillary mat stands, 4 will fit in this length of tray. If you wish to grow the Microgreens using our grill that fits into this tray type, then in it can be purchased as a separate kit (we do not sell these separately because they are subject to damage if not shipped with a tray). Click to hide

Here we can see the grill being used with punnets in 2 slightly different ways. The top picture shows where paper towel has been added to the grill this allows you to put the punnets directly onto the grill and the paper towel will siphon the water up to the punnets obviously only necessary until the roots of the plant penetrate the grill. The 2nd method is without the paper towel, you can just make sure you flood the grill every few days to make sure the punnets have enough moisture until the roots penetrate through the grill, or you can just leave the punnets in the tray until you see the roots protruding through the base of the punnets and then insert the grill and place on top. Click to hide

Info.

Here we see the cover being lifted off Radish Micro-greens being grown in Coco fibre. As mentioned previously the cover performs 2 major functions, 1st it gives the seeds something to press against allowing their roots to push into the growing medium and 2, it creates a humid environment which promotes germination. You can also see in the left-hand edge of the picture where the cover of the grill has a cable tie attached to it to allow for it to be easily removed like a small handle. Click to hide

Info.

Here we can see Cress seeds being grown as micro-greens just prior to removing the cover, you can see how the clamp is holding the cover in place i.e. forcing the roots to penetrate the growing medium. The next step is to remove the cover and then spray vigourously which forces some of the shoots that have been lifted up by neighbouring growth and forces them back down against the growing medium, repeat this process a few times to ensure that any of the growing medium that has stuck to the leaves is also washed off. Click to hide

Info.

Hydrogen Peroxide + Pipette + Optional 750ml Spray Bottle.
I use Hydrogen Peroxide or H2O2 in a spray bottle for Microgreens i.e. spraying the seeds and the paper towel at the base of the tray.
The H2O2 has 2 functions one is it releases oxygen into the water and it also counteracts any mould that may lie dormant attached to the outside of the seeds.
I recommend adding 3 mls to a 750 ml spray bottle, a full pipette is 3 mls. It is generally recommended to keep the H2O2 in the refrigerator to minimise evaporation, I personally store in the freezer, it does not freeze, further reducing its tendency to evaporate. See the Parts Category Or Click to hide

Info.

Here we see Rocket being grown in vermiculite on top of the grill. This does not need the cover as you just cover the grill with the growing medium flatten out then sprinkle 2 rows of rocket seed, or similar. These seeds are very tiny so make sure you don't put too many e.g. 1 per centimetre, spray with water, (I use filtered water with hydrogen peroxide, which promotes germination and kills any mould that may be on the seed coating). Then cover with a ridge of growing medium. In the top picture you can see the shoots just coming through, in the bottom picture you can see the Rocket ready to harvest. Click to hide

Info.

Paper towel being sprayed with filtered water with Hydrogen Peroxide, here we see the stages involved in preparing the grill with a paper towel to grow Micro-greens. The good thing about the size of the grill is that it fits perfectly 2 sheets of paper towel, and the edges fold over and hang down into the reservoir giving you a capillary mat situation which will siphon water up from the reservoir keeping the growing medium moist during germination and until the roots have grown through the grill into the reservoir. Click to hide

Info.

Microgreen Tray 570 x 170mm (Copy)

Price range: $12.58 through $24.00 GST inc.

Microgreen Tray 570 x 170mm

Microgreen Tray 570 x 170mm x 28mm.. Made from high quality UV stable PP 5, made in Italy. We do not currently have a stand made specifically for this length of tray. You can use this as is i.e. just to sit pot plants in. You can add capillary mat stands, 4 will fit in this length of tray. If you wish to grow the Microgreens using our grill that fits into this tray type, then in it can be purchased as a separate kit (we do not sell these separately because they are subject to damage if not shipped with a tray)

Tray 570x170mm

470x170mm Tray Parts

Clear

Product Info

Microgreen Tray 570x170mm

Microgreen Tray 570mm long, 175mm wide, and 28mm deep. You can use this as is i.e. just to sit pot plants in. You can add capillary mat stands, 4 will fit in this length of tray. If you wish to grow the Microgreens using our grill that fits into this tray type, then in it can be purchased as a separate kit (we do not sell these separately because they are subject to damage if not shipped with a tray).

Microgreen Tray 570 x 170mm (Copy)

Microgreen Tray 570 x 170mm

Product Info

Microgreen Tray 570x170mm

330x245mm Tray Kits

330x245mm Kit (Parts)

470x170mm Tray Kits

470x170mm Kit (Parts)

230mm Round Tray Kits

230mm Round Tray Kits (Parts)

Microgreen/Herb Info.

Login (Helps with quick Courier charge) or use Social Login.