3 types of grill lifters (i.e. the white grill for the 330 x 245 mm Microgreen trays)
1 – set of 4 external lifters, used by themselves for increasing the reservoir and maintaining dryness of the growing medium (minimising mould) e.g. for SnowPea Wheatgrass.
2 – set of 2 large lifters located underneath the tray in the centre to be used in conjunction with the 4 external lifters for stabilising the grill and increasing the water reservoir e.g. for longer term Microgreen such as Beetroot and Silver Beat.
3 – set of 2 smaller lifters located underneath the tray in the centre, stabilising the grill, used with punnets for medium-term microgreens such as Rocket and Coriander. The other use is with small potted herbs. Click to hide.

Set of 4 lifted tabs designed to elevate the grill section of the tray on the outside edge. This has 2 functions one to create a larger reservoir of water and 2 to allow the growing medium on the surface to remain dry (important for Pea and Wheatgrass where mould can be a problem if too much moisture exists on the surface of the growing medium). Click to hide.

Set of 6 lifted tabs designed to elevate the grill section of the tray. The extra 2 lifting tabs slot in underneath the tray in the centre, this is useful for microgreens/baby leaf that grow for several months and consume a lot of water. The centre tabs keep the grill horizontal, meaning that if you're using the punnets as in the picture seen here growing beetroot then there is no bending in the tray at the centre and all punnets have equal access to the water below. This can also be useful if you wish to grow 1 or 2 pot plants where the roots grow through the base of the pot into the reservoir below. There is a shorter version of these 2 tabs that does not require the use of the 4 lifting tabs around the outside. Click to hide.

Set of 2 small lifter tabs designed to elevate the grill section of the tray. The 2 lifting tabs slot in underneath the tray in the centre, this is useful for microgreens/baby leaf that grow for several months and consume a lot of water. The centre tabs keep the grill horizontal, meaning that if you're growing a couple of pots of small herbs i.e. that you pick up at the market, then there is no bending in the tray at the centre. This is the shorter version of these 2 tabs that does not require the use of the 4 lifting tabs around the outside. This is probably the quickest and easy way to grow a wide range of herbs especially Basil which had a great range of varieties/flavours to your salad. Just remember when you bring potted herbs from outside into your system it is a good precaution to give them a good spray with a pyrethrum (natural) herbicide both on the leaves under the leaf and on the top of the potting mix. Click to hide

Here we see the 2 small lifter tabs from underneath supporting 2 small pots of Basil, you can see how the roots have grown through the slots. These pots generally come with slow release fertiliser so you do not need to add fertiliser to the water, just slowly thin out the smaller Basil plants and occasionally add a small amount of nutrient water to the top of the pot. Click to hide

Grill Lifter

$4.00 – $11.00 GST inc.

3 types of grill lifters (i.e. the white grill for the 330 x 245 mm Microgreen trays)
1 – set of 4 external lifters, used by themselves for increasing the reservoir and maintaining dryness of the growing medium (minimising mould) e.g. for SnowPea Wheatgrass.
2 – set of 2 large lifters located underneath the tray in the centre and a set of 4 external lifters, used for stabilising the grill and increasing the water reservoir e.g. for longer term Microgreen such as Beetroot and Silver Beat.
3 – set of 2 smaller lifters located underneath the tray in the centre, stabilising the grill, used with punnets for medium-term microgreens such as Rocket and Coriander. The other use is with small potted herbs.

Grill Lifter Types	Clear

SKU: Sprout Cover Sm-2-1-1 Category: MicroGreens Herb Kits

Product Info.

3 types of Grill Lifters (i.e. the white grill for the 330 x 245 mm Microgreen trays)

1– set of 4 external lifters, used by themselves for increasing the reservoir and maintaining dryness of the growing medium (minimising mould) e.g. for SnowPea Wheatgrass.

2– set of 2 large lifters located underneath the tray in the centre to be used in conjunction with the 4 external lifters for stabilising the grill and increasing the water reservoir e.g. for longer term Microgreen such as Beetroot and Silver Beat.

3– set of 2 smaller lifters located underneath the tray in the centre, stabilising the grill, used with punnets for medium-term microgreens such as Rocket and Coriander. The other use is with small potted herbs.

330x245mm Tray Kits

Microgreen 330x245mm Kit 01

Basic kit 01 (Microgreen Rect. Tray 330x245mm) which gives you everything you need to get started except for the seeds. You get one tray plus a grill insert, 3 L of Vermiculite growing medium(crushed rock that has been heated to give it a popcorn like effect, good for holding air and water). 250 ml of bio activated organic fertiliser, 1 foldout insect trap, 1 Perspex tool for flattening the growing medium and pressing the seeds into it plus the option of a cover.. Select the Product Name button to go to that Product Or Click to hide.

Microgreen 330x245mm Kit 01

Microgreen 330x245mm Kit 01

2xTrays 3x5W LED

Microgreen Base kit 3x 5W LED. There are many ways you can grow microgreens and some ways depending on the seed type, for instance, growing SnowPea and Wheatgrass, is made a lot easier if you are able to lift the grill above the reservoir, this gives more room for the large root mass and also means the growing medium can stay dry alleviating the problem of seeds rotting and causing mould. The SnowPea is the Queen of green leaf and is the base of all of my salads. This is why we include the 4 tab set that sits on the outside of the reservoir (part 16 in the picture). We have also made some acrylic tweezers which help you remove ungerminated seeds, (part 8 in the picture). An acrylic flattening tool (part 9 in the picture), it’s good to press the seeds into the growing medium before you spray them to ensure they come in contact with moisture, especially when you using the cover. We give you 2 types of cable ties one narrow and one wide, the narrow one is for attaching the light bracket to the stand and securing the cable, the wider cable tie is for securing the horizontal movement of the lights, also supplying a method of securing the sticky in stray insect trap. The power supply is 36 W, so you can comfortably add 6X5 West lights i.e. another shelf without purchasing another power supply or connectors (parts 12 & 13 in picture). Part 14 attaches to the base of the grill ensuring the grill does not sag in the centre leading to an uneven distribution of water, especially useful for potted plants and punnets. Part 17 is 6 punnets that will fit into the sprouting tray, normally you would use these in a taller shelf system, they can be either placed in the base or on top of the grill, personally I just used 5 which gives me a gap at the front in the middle and I place them in the base of the tray and I can easily see when water needs to be added, you may wish to start them on the shelf and then move them to another shelf where they can grow a little bit taller. We also give you 2 trays, when in stock a choice of 2 colours, having to trays is particularly useful if you’re doing microgreens that turnaround in 2 weeks, as you can germinate the next tray on the top shelf which is sitting above the lights getting their warmth from them thus exhilarating their germination. So if you are just doing 2-3wks microgreens in the trays such as Radish, SnowPea, Kale, Broccoli, then this small height space and is all that is required. You can also grow the Coriander and Rocket in the trays with the addition of the pelletised fertiliser or you can use the punnets which is a better option, but you will need to keep them trimmed or move to a larger shelf height. Select the Product Name button to go to that Product Or Click to hide.

Microgreen Base kit 3x 5W LED

2xTrays 3x5W LED

2xTrays 6x5W LED

Microgreen Base kit 6x 5W LED, 3 Shelf. There are many ways you can grow microgreens and some ways depending on the seed type, for instance, growing SnowPea and Wheatgrass, is made a lot easier if you are able to lift the grill above the reservoir, this gives more room for the large root mass and also means the growing medium can stay dry alleviating the problem of seeds rotting and causing mould. The SnowPea is the Queen of green leaf and is the base of all of my salads. This is why we include the 4 tab set that sits on the outside of the reservoir (part 16 in the picture). We have also made some acrylic tweezers which help you remove ungerminated seeds, (part 8 in the picture). An acrylic flattening tool (part 9 in the picture), it’s good to press the seeds into the growing medium before you spray them to ensure they come in contact with moisture, especially when you using the cover. We give you 2 types of cable ties one narrow and one wide, the narrow one is for attaching the light bracket to the stand and securing the cable, the wider cable tie is for securing the horizontal movement of the lights, also supplying a method of securing the sticky in stray insect trap. The power supply is 36 W, so you can comfortably add 6X5 West lights i.e. another shelf without purchasing another power supply or connectors (parts 12 & 13 in picture). Part 14 attaches to the base of the grill ensuring the grill does not sag in the centre leading to an uneven distribution of water, especially useful for potted plants and punnets. Part 17 is 6 punnets that will fit into the sprouting tray, normally you would use these in a taller shelf system, they can be either placed in the base or on top of the grill, personally I just used 5 which gives me a gap at the front in the middle and I place them in the base of the tray and I can easily see when water needs to be added, you may wish to start them on the shelf and then move them to another shelf where they can grow a little bit taller. We also give you 2 trays, when in stock a choice of 2 colours, having to trays is particularly useful if you’re doing microgreens that turnaround in 2 weeks, as you can germinate the next tray on the top shelf which is sitting above the lights getting their warmth from them thus exhilarating their germination. So if you are just doing 2-3wks microgreens in the trays such as Radish, SnowPea, Kale, Broccoli, then this small height space and is all that is required. You can also grow the Coriander and Rocket in the trays with the addition of the pelletised fertiliser or you can use the punnets which is a better option, but you will need to keep them trimmed or move to a larger shelf height. Select the Product Name button to go to that Product Or Click to hide.

Microgreen Base kit 6x 5W LED

2xTrays 6x5W LED

2xTrays 25W LED

Base kit 2x Shelf 2x 330x245mm trays 1x 25W LED Panel which gives you everything you need to get started except for the seeds. We have 3 of LED lights, for our single shelf lights, 10W, 25W, 100W. 10W is sufficient for short-term microgreens, 25W is good for short or longer term microgreens e.g. rocket coriander and small to medium height pot plants. The 100W is best for fruiting/budding plants that require more power. All the lights are heatsink and do not require fans. Select the Product Name button to go to that Product Or Click to hide.

2 Rect. Trays 25W LED Kit

2xTrays 25W LED

2xTrays 25w 12xPunnets

Base kit 2x Shelf, 2x 330x245mm trays, 1x 25W LED Panel, 12xPunnets which gives you everything you need to get started, except for the seeds, to grow all types of short-term microgreens. The idea of this kit is for those who may wish to just grow small quantities e.g. 1 punnet of wheatgrass or radish or broccoli or SnowPea per day or a mix of, just replacing each punnet into the top tray for germination after finishing. Click to hide.

2 Trays 25W LED Kit 12 Punnets

2xTrays 25w 12xPunnets

1xTray 25w Pot Plants 3xShelf

Base kit for Pot Plants - 3x Shelf, 1x 330x245mm trays, 1x 25W LED Panel. The extra shelf gives you room to grow taller pot plants, also the small internal grill lifter ensures that the grill remains horizontal if you wish to use it as the base for your potted plants. There are many ways you can use the system to grow small store purchased pots of Basil etc or repot them into larger pots. Click to hide.

Pot Plant - 1xTray 25W LED 3xShelf

1xTray 25w Pot Plants 3xShelf

1xTray 100w Pot Plants 3xShelf

Base kit for Pot Plants - 3x Shelf, 1x 330x245mm trays, 1x 100W LED Panel. The extra shelf gives you room to grow taller pot plants, also the small internal grill lifter ensures that the grill remains horizontal if you wish to use it as the base for your potted plants. There are many ways you can use the system to grow small store purchased pots of Basil etc or repot them into larger pots.
The difference between this kit and the 25 W. kit is that this light is 100W, both lights have no fan, i.e. no noise. Our aim is to allow you to grow as much as possible using the smallest possible space & least amount of power. So this light would come in handy if you want to grow something that requires more power eg, fruiting or bud development. Like the 25W, it comes with a mix of 2 different types of white and 660nm red LEDs. Click to hide.

Pot Plant - 1xTray 100W LED 3xShelf

1xTray 100w Pot Plants 3xShelf

330x245mm Kit (Parts)

Microgreen Sprout Tray 330x245mm

Microgreen Sprout Tray 330x245mm with or without cover. Select the Product Name button to go to that Product Or Click to hide.

330x245mm Microgreen Tray

Microgreen Sprout Tray 330x245mm

Clear Perspex Sprout cover

Clear Perspex Sprout cover, seen here with protective white film which just peels off, is used as a cover for our Microgreen Rect. Tray 330x245mm. Select the Product Name button to go to that Product Or Click to hide.

Clear Sprout cover

Clear Perspex Sprout cover

Capillary Mat + Stand

Here we see our Capillary mat and mini stand designed for our 3 tray types types, 1 of the main reasons for using the capillary mat is it makes watering very easy & you can take full use of the available depth of the trays ie more water less often. It's good to have a 2nd tray so if the water does become coloured you can just swap the trays and clean the one you have removed. The pot sits on the capillary mat which is elevated to the level of the overflow channel of the tray on the left & just below the top of the other 2 tray types. Click to hide.

Capillary Mat + Stand

Capillary Mat + Stand

Grill lifter set for 330x245mm trays

3 types of grill lifters (i.e. the white grill for the 330 x 245 mm Microgreen trays)
1 – set of 4 external lifters, used by themselves for increasing the reservoir and maintaining dryness of the growing medium e.g. for SnowPea Wheatgrass.
2 – set of 2 large lifters located underneath the tray in the centre to be used in conjunction with the 4 external lifters for stabilising the grill and increasing the water reservoir e.g. for longer term Microgreen such as Beetroot and Silver Beat or for thirsty potted plants like Mint.
3 – set of 2 smaller lifters located underneath the tray in the centre, stabilising the grill, used with punnets for medium-term microgreens such as Rocket and Coriander. The other use is with small potted herbs.
Select the Product Name button to go to that Product Or Click to hide.

Grill lifters - 330x245mm trays

Grill lifter set for 330x245mm trays

Tray Lifter for Light Stands

Microgreen tray lifter, is used to elevate the trays closer to the light source. Comes with stainless steel attachments. As you can see in the pictures it can be used for both types of rectangular trays. Select the Product Name button to go to that Product Or Click to hide.

Tray Lifter for Light Stands

Tray Lifter for Light Stands

Veg. Storage Kit x 1

Vegetable storage kit - this kit consists of 2 cotton bags, one mesh bag, and a clip to seal plastic bags. Can be used to store leafy greens, sprouts, vegetables in general and can also be used as a shopping/carry bag also designed to fold into a small package.
This is the method I now use to store my sprouts and salad greens also other vegetables. Leafy greens & sprouts, it's best to store them 1st in a mesh bag, any damp material will not stick to the cotton bag (meaning you do not have to wash the cotton bag every time you change it). So the simple procedure is put the leafy greens inside the mesh bag, zip it up, place inside the cotton bag, then place inside a plastic bag that doesn't have any holes in it, gently squeeze the air out and secure with the clip. Select the Product Name button to go to that Product Or Click to hide.

Vegetable storage kit

Veg. Storage Kit x 1

Microgreen Stand Base Single

Microgreen Base Stand for a single 330x245mm tray. You have the option of 2 different shelf heights i.e. distance between the tray and the lights. It also has the option of including a Perspex shelf which comes with adjustable height feet, allowing you to place power supply and excess cabling out of sight. Select the Product Name button to go to that Product Or Click to hide.

Microgreen Stand Base Single

Microgreen Stand Base Single

Microgreen Stand Base Single

Microgreen Stand Shelf for a single 330x245mm tray. You have the option of 2 different shelf heights i.e. distance between the tray and the lights. It also has the option of including a Perspex shelf. Other advantages of using the Perspex shelf are that you can use a different type of pot plant i.e. that doesn’t use our rectangular tray, may be aesthetically more pleasing, also the Perspex shelf will diminish the possibility of spillage as it will collect 1st on the Perspex before dripping down onto either the floor or 1 of the lights in particular 25 W light is not waterproof whereas the 5 and 10W. and 100W lights are. Select the Product Name button to go to that Product Or Click to hide.

Microgreen Stand Shelf Single

Microgreen Stand Base Single

Microgreen LED Kit 15W-30W

Microgreen LED Kit 15W-30W
This kit gives you the parts and options to either attach 3 or 6 5W LED Microgreen lights to our stand or connect directly to a piece of wood e.g a cupboard shelf.
The advantage of these lights are that they are low-power, high quality (Samsung LED), they are only operating at about 80% intensity, due to the losses in the 2m attachment cable, meaning they will last a very very long time. They are also extremely water resistant so any spillage is not a problem and spreading 3 across the top of the trays gives a very even spread of light.
So you get the base kit (what is inside the red line and various options e.g. the power supply and breakout cabling can support up to 6 lights so there is the option of an extra 3 lights, what this means is that adding these gives you the ability to use 2 shelves if using our stand. Also if using our stand you you will need to choose the option of our acrylic brackets, which comes with cable ties allowing for securing the cable in a neat manner and also the attachment of 1 sticky insect trap per shelf or if you want to mount say to the underside of a bookshelf, then you have the option of a clip that can be screwed into the wood on the underside, coming with a nylon washer to create a small airgap for better cooling. Select the Product Name button to go to that Product Or Click to hide.

Microgreen LED Kit 15W-30W

Microgreen LED Kit 15W-30W

Microgreen LED Kit 25W

Microgreen LED Kit 25W
A 25 W. LED light panel with a mix of white and red LEDs, meaning you can grow a wide range of vegetables or even flower/fruiting plants. It comes with a 2m extension cable power supply and steel cable. We also supply cable ties which are much more flexible when connecting to our stands and also with regard to securing the cable to the vertical sections of the stand at the rear.
1 of the advantages is that the LEDs are enclosed in a reflective cone, this narrows the spread of each LED, meaning more intensity.
The only downside of this light is that it is not water resistant so you have to be very careful about spillage from trays above. If you do have a spillage make sure you get the sponge out and get rid of excess water as quickly as possible, if you have the time then there are a couple of preventative measures you can take the 1st 1 is just to run a silicon bead around the edges and over the screws heads, this will create a small dam that will enable you time to remove the water before it seeps down underneath, the other alternative is to cover with aluminium foil as you will see displayed in a later slide. Select the Product Name button to go to that Product Or Click to hide.

Microgreen LED Kit 25W

Microgreen LED Kit 25W

Microgreen Herb LED Kit 100W

Microgreen Herb LED Kit 100W
This is our 100 W. LED, which can be used for larger plants it comes with a mix of white LEDs giving it full spectrum with the addition of 660 nm red LEDs, allowing for a wide range of vegetables to be grown, along with flower and fruiting types. You can see from the picture that if you are mounting it on the top of the stand it is very easy as it matches our stand dimensions perfectly and just rests in place. The light is water resistant so light spillage is not a problem. The parts that come with it are 1- mains power cable connecting to the power supply which is mounted on top of the light, 1.8 m close, 2- metal cable connectors 3- and adjustable extension cable allowing you to move the light up and down, not really applicable if using with our stand but if using in another application could be very useful if your ceiling is high, 4- a connector plate which allows you to connect the lights together i.e. you could connect them 1, 2, 3 or 4 in a row and then you only need one cable to hold it up, which again could be connected to the movable extension cable, or you could increase the grow area by connecting 4 together in a square. The picture on the right shows a basil plant being grown on a pillory Matt, sitting in 1 of our Microgreen trays, the mid-front crossbar has been removed allowing you to easily remove the plant and tray if you would like to clean the base or for any other reason. Select the Product Name button to go to that Product Or Click to hide.

Microgreen Herb LED Kit 100W

Microgreen Herb LED Kit 100W

470x170mm Tray Kits

470x170mm kit, 6 x Punnets

Basic kit which gives you everything you need to get started except for the seeds. Using 2 different colour tray options to support up to 6 punnets with or without covers. Select the Product Name button to go to that Product Or Click to hide.

470x170mm kit, 6 x Punnets

470x170mm kit, 6 x Punnets

470x170mm Kit (Parts)

Microgreen tray lifter

Microgreen tray lifter, is used to elevate the trays closer to the light source. Comes with stainless steel attachments. Select the Product Name button to go to that Product Or Click to hide.

Microgreen tray lifter

Microgreen tray lifter

Capillary Mat + Stand

Here we see our Capillary mat and mini stand designed for our 3 tray types types, 1 of the main reasons for using the capillary mat is it makes watering very easy & you can take full use of the available depth of the trays ie more water less often. It's good to have a 2nd tray so if the water does become coloured you can just swap the trays and clean the one you have removed. The pot sits on the capillary mat which is elevated to the level of the overflow channel of the tray on the left & just below the top of the other 2 tray types. Click to hide.

Capillary Mat + Stand

Capillary Mat + Stand

230mm Round Tray Kits

230mm Round Micro Green Kits - 1

This basic kit "Micro Green Kit 230mm Round Tray Kit - 1", which gives you everything you need to get started except for the seeds. You get one tray plus a grill insert, 2 L of Vermiculite growing medium(crushed rock that has been heated to give it a popcorn like effect, good for holding air and water). 250 ml of bio activated organic fertiliser, 1 foldout insect trap, 1 Perspex tool for flattening the growing medium and pressing the seeds into it. The kit also comes with a small cover which makes it easier to add the growing medium i.e. stops it falling down through the watering hole, there are also 2 supports that sit underneath the grill to ensure the optimum height of the grill in the tray.
Can be used to grow arrange of microgreens, personally I use a paper towel to cover the grill and then use vermiculite as the growing medium. It can also be used to grow small potted herbs, in this configuration you just add the herb to the grill, flood the grill until the roots penetrate into the reservoir below, at this stage you may need to add some of the nutrient solution to the water in the reservoir. Here seen grown in 1 of our light stands which is specifically designed for narrow spaces such as a cupboard or a kitchen bench. Select the Product Name button to go to that Product Or Click to hide.

Micro Green Kit 230mm Rnd Tray -1

230mm Round Micro Green Kits - 1

230mm Round Tray Kits (Parts)

Micro Green Tray Cover

Micro Green 230mmD Tray Cover

Micro Green Kit 230mm Diameter Round Tray Cover, if you do not purchase the kit which contains a cover then you can purchase it later if you think you may need it. Personally I would use it when doing Radish, Broccoli, Kale, but not with longer term seeds such as Rocket or Coriander which are best covered or large seeds like Pea, where you don't really have enough room, but it will work either way. Click to hide.

Micro Green 230mmD Tray Cover

Micro Green 230mmD Tray Cover

Capillary Mat + Stand

Here we see our Capillary mat and mini stand designed for our 3 tray types types, 1 of the main reasons for using the capillary mat is it makes watering very easy & you can take full use of the available depth of the trays ie more water less often. It's good to have a 2nd tray so if the water does become coloured you can just swap the trays and clean the one you have removed. The pot sits on the capillary mat which is elevated to the level of the overflow channel of the tray on the left & just below the top of the other 2 tray types. Click to hide.

Capillary Mat + Stand

Capillary Mat + Stand

Seeds All

Select Seed Name

Note 1 - Can't ship to Tas or WA quarantine restrictions.

Note 2 - the 20 KG quantities of seed take an extra week for shipping as we need to get them in from the temperature/humidity controlled warehouse(Red).

Seeds for Sprouting Loose sprouts (i.e. grown in our Sprouting Colanders or jars, you eat the leaf, stem & root).

Alfalfa (100g-20kg), Broccoli (100g-20kg), Broccoli Organic, Fenugreek Organic, Fenugreek(100g-20kg), Radish Daikon (100g-20kg), Radish Red Arrow, Lentils Red, Pea Massey Gem(100g-20kg), Chick Pea Organic, Mung Bean(100g-20kg), Red Clover, Kale Red (100g-20kg),

Seeds for Microgreens/Herb Leaf/Plant

(i.e. grown in a tray, you eat the leaf & stem).

Snow Pea(100g-20kg), Field Pea(100g-20kg), Pea Massey Gem(100g-20kg), Radish Daikon (100g-20kg), Radish Red Arrow, Silverbeet Ruby Red, Beetroot Detroit Red, Rocket Arugula, Coriander, Kale Red (100g-20kg), Basil Genovese, Basil Thai, Cress Curly, Wheat Organic, Sunflower

Seeds for Eating

(i.e. roast, add to cooking, Tea).

Fenugreek(100g-20kg), Fenugreek Organic, Lentils Red, Chick Pea Organic, Linseed/Flaxseed Gold Organic, Sesame seed Organic, Buckwheat seed Organic,